FactoryTalk Activation Manager - Cara mudah aktivasi lisensi untuk Rockwell PLC Software

Sudah pernahkah anda menggunakan FactoryTalk Activation Manager dari Rockwell? 

Sebelum menjalankan aktivasi lisensi ini, pastikan anda terhubung dengan jaringan internet. dan Process ini hanya berlaku untuk aktivasi serial number resmi "BUKAN BAJAKAN/BUKAN COPY".

System requirements

In general, FactoryTalk Activation is designed to work within the system requirements of all Rockwell Automation software products. FactoryTalk® Activation is compatible with the 32-bit and 64-bit versions of the following operating systems:

• Windows® 7
• Windows Vista SP2, Business and Home editions
• Windows XP SP SP3
• Windows Server 2008 SP2
• Windows 2003 Server SP2
• Windows Server 2003 R2 SP2
• Windows 2008 R2 Server (64 bit)

Activations may be installed on compressed drives and RAID arrays.

Unsupported operating systems

The following operating systems are no longer supported:

Windows 2000

• Windows 9x
• Windows NT 4.0

Berikut ini cara singkat dan mudah jika anda mempunyai Lisensi Software RSLogix5000 atau FactoryView.

Jalankan Software FactoryTalk Activation Manager melalui Start > Programs >> Rockwell Software >> FactoryTalk Activation >> FactoryTalk Activation Manager. Kemudian akan muncul windows seperti dibawah ini.

Kemudian setelah muncul windows seperti diatas, klik tombol Get New Activation, setelah itu ikut langkah yang diberikan, masukan serial number software rockwell, kemudian klik tab Manage Activation. Setelah itu akan muncul tampilan windows seperti dibawah ini.

Klik Get New Activations dan secara otomatis software ini akan terkonek dengan server Rockwell.

Jika anda berhasil mengaktivasi lisensi ini.. sebuah tampilan kolom yang merincikan apa yang anda aktivasi akan muncul.

Jika anda ingin mengetahui status server aktivasi... silahkan klik tab Advanced...

Selamat mencoba dan Say no to Copy... No Bajakan.. No Pirates....

Read More

HI 1756-2WS ControlLogix Weigh Scale Module

 
Dual Scale ControlLogix Weigh Scale Module


Hardy Instruments’ HI 1756-2WS is a single slot, dual scale, weigh scale module that mounts in an Allen-Bradley ControlLogix® local or remote Chassis. It reads weight and diagnostic data from two seperate sets of strain gauge load sensors or load cells and communicates this data over the I/O chassis Backplane to the ControlLogix® Processor. The HI 1756-2WS module reduces installation costs, since no external stand-alone scale instrument with a wired communications link to the PLC is needed.

The HI 1756-2WS conditions and digitizes the weight signal fifty times per second with over eight million counts of resolution over a differential signal range of -2.5 to 17.5mV. It then transmits the selectable Gross, Net and/or Rate-of-Change data to the processor. This high resolution allows the module to tolerate large dead loads and over sizing of the load sensors while retaining a high level of usable resolution.

The module supplies 5 volts of DC excitation to drive up to four 350 ohm load sensors or load cells associated with a single scale (four additional for a second scale). It will support additional load cells with an external power supply.

The HI 1756-WS supports the use of the producer/consumer technology in the ControlLogix® system to transmit data. This type of communications is an intelligent data exchange in the system where the module produces data without having to be polled.

Download:
Manual book
Datasheets

Read More

Rockwell Automation Recruiting

Yang belum pernah lihat pabrik-pabrik yang menggunakan sistem otomatisasi... Silahkan lihat di video ini.

Thanks for Rockwell Automation.

Read More